Magnetizing Equipment

Magnetization Automation

Magnet Measuring Instruments

Magnetization Services

In the field of industrial automation, servo motor as the core drive components, its performance stability is directly related to equipment efficiency and service life. High temperature, overload and other special working conditions can easily cause demagnetization of the motor magnet, which in turn leads to problems such as reduced speed and increased energy consumption. A batch of servo motors of an enterprise have been in high temperature operation for a long time and have been seriously demagnetized, which requires a professional treatment solution. Relying on more than 10 years of magnetizing technology accumulation, JiuJu Automation customized the "demagnetization - re-magnetization" full-process magnetic field adjustment solution for this enterprise, successfully restoring the magnetic properties of the motor and realizing the adaptation of magnetizing equipment, and the following is the complete record of this project.

Demagnetization Diagnosis: Pinpointing the Cause of Magnetic Energy Degradation

The customer sent two sizes of servo motor rotors to JiuJi's laboratory and the following data were obtained after Gaussmeter testing:

• Small motors: 17.6 GS remanent magnetization before magnetization
• Large motors: 140.2 GS remanent magnetization before magnetization

Through the polarity direction detection, it is found that the uniformity of the magnetic pole distribution of the motor has decreased, and the lack of magnetic flux density directly leads to the weakening of torque output. After analysis, the irreversible demagnetization triggered by the high temperature environment is the main problem, and the magnetic field needs to be adjusted and optimized with the help of high-precision magnetizing technology.

Technology Tackle: 3000V High Power Magnetization System Solution

For the customer's batch motor processing needs, JiuJi adopts the combination solution of MA-3050 magnetizer with CS-60 magnetizing coil, whose core technical advantages are as follows:

1.High-voltage energy storage transient discharge:Using 3000V high-voltage capacitor for energy storage, releasing 3000A peak current for the magnetizing coil in microsecond time, the resulting instantaneous magnetic field strength can be up to 5T (Tesla), which is far more than the endowed coercive force (Hcj) of the magnetic material, guaranteeing that the magnetization reaches the saturation state.

2.Dual equipment working in tandem:Mainframe MA-3050: Precise control of voltage, capacitance and discharge timing ensures the stability of the magnetization process;

3. Magnetizing coil CS-60: customized design, can be adapted to different sizes of rotors, magnetic field uniformity error control at <2%.

4.Verification of Faraday's law of electromagnetic induction:The discharge waveforms were monitored by an oscilloscope, confirming that the magnetic field strength was linearly related to the magnetizing energy, and the measured data matched the theoretical model with 99.71 TP3T.

III. Effectiveness verification: magnetic energy density restored to the initial standard

After 3 cycles of magnetizing operation, the magnetic parameters of the motor show significant optimization:

• Small motors: 1543GS remanent magnetization after magnetization.
• Large motors: remanent magnetization up to 2301GS after magnetization

The result of the speed test shows that under the rated load condition, the speed fluctuation rate of the motor is optimized from ±8% to ±1.5%, and the torque output is restored to the nominal value of 98%, which can be fully adapted to the customer's actual use in the production scenario.

Optimization: Recommended Economy of MA-3030 Magnetizing System

Based on the actual test data, JiuJi recommends the combination of MA-3030 magnetizer (3000V/3000μF) and CS-60 magnetizing coil, with the following core advantages:

1. Reduced cost and adaptability: Compared with the MA-3050 model, the MA-3030 magnetizer can still reach 4500J of magnetizing energy after optimizing and adjusting the capacitance capacity, which can satisfy the customer's needs for the magnetizing operation of motor models above 90%;

2. Temperature control protection design: it can be used with ice water machine (optional), which can be adapted to high-frequency magnetization operation scenarios and help extend the stable use cycle of the equipment.

With the MA series intelligent magnetizing system, JiuJi Automation has created a closed-loop solution to regenerate the magnetic energy of industrial motors. In response to the actual problem of high-temperature demagnetization of a customer's batch servo motors (the residual magnetism of small-sized motors was recovered from 17.6Gs to 1543Gs, and that of large-sized motors from 140.2Gs to 2301Gs), JiuJi Automation adopts the high-pressure pulse technology of 3000V/3000μF, and realizes the motor's magnetic performance of 102% by using the combination of the MA-3050 mainframe and the CS-60 coils. Recovery effect.

Compared with the traditional way of replacing motors, this solution can save the costs related to 82%, and at the same time, it provides 3-year warranty service, which has already been formed into a standardized service package (including the MA-3030 basic set and anti-oxidation value-added services). In the future, JiuJu Automation will continue to invest in the research and development of gradient magnetization, intelligent temperature control and other core technologies to help optimize and upgrade the whole life cycle management of manufacturing equipment.

Magnetization of Magnetic Materials

3C Electronic Magnetization

Motor Rotor Magnetization

Car Speaker Magnetization

New Energy Vehicle Industry

Medical Equipment Industry

JiuJu Magnetization Case: Record of the whole process of magnetizing silicone magnetic products

February 25, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service In the industrial manufacturing field, silicone magnetic products are widely used in smart wear and sealing components because of their flexibility and magnetic properties. The core of their magnetic properties depends on professional magnetization process. This time, JiuJu magnetization undertakes the project of magnetizing silicone products, and successfully realizes the product's magnetic force from 0.01 gauss to 15.5 gauss by leaps and bounds, the following is the whole process detail...

JiuJu Magnetic Stripe Magnetization Video Case: Medical Magnetic Stripe Magnetization

January 7, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Services Magnetic stripes are widely used in medical cards, medical insurance cards and other medical credentials to store key data such as basic patient information and medical insurance participation information. Due to the frequency of use and the external environment, the magnetic stripe may become magnetically weakened or demagnetized, resulting in the inability of the equipment to read the information, and then need to be magnetized. The core principle of magnetization is to make the magnetic strip inside the...

JiuJu Magnetizing Video Case: Rubber Silicone and NdFeB Magnetizing

January 6, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service This paper focuses on the core process of magnetization of Rubber Silicone and NdFeB, the initial state of non-magnetic before magnetization, and the magnetic performance after magnetization. Through the gaussmeter measurement verification, it is clear that the highest magnetic unit after magnetization is up to 45.9 units and the highest magnetic unit after magnetization is up to 45.9 units (measured by gaussmeter). The magnetization process is the core link to realize the magnetic transformation of the two...

Precision Magnetization for Ferrite Cubes

November 13, 2025

Specializing in ferrite cube micro-magnetization, we deliver customized, precise solutions tailored to ferrite cube material properties. By fine-tuning parameters, we ensure the magnetization meets exact standards, fulfilling high-precision magnetic requirements and adapting to applications with strict demands for magnetization accuracy.

Motor magnetizer: what core indicators should be most concerned about when the factory selection

March 5, 2026

Motor magnetizer: what core indicators should be most concerned about when the factory selection

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

February 27, 2026

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

An article to read: the principle of motor magnetization, the need and the underlying logic of permanent magnet motors

February 26, 2026

Automated Magnetic Charging Integrated Solution Magnetizing Equipment Magnetizing Automation Magnetic Measuring Instruments Magnetizing Service Magnetizing is the core step in the manufacture and maintenance of permanent magnet motors such as permanent magnet synchronous motors (PMS) and brushless DC motors (BDC). It relies on the principle of electromagnetic induction and magnetic field energy conversion, with the help of external strong magnetic field to make the internal magnetic domains of permanent magnets arranged in a directional manner, so as to form stable and long-lasting magnetism, which is the basic link to ensure the normal operation of the motor. First, the essence of magnetization: to give the motor...

Spring Ushers in a New Journey, Action Drives New Chapters｜JIUJU Automation Kicks Off 2026 with Success

February 25, 2026

Magnetizing Equipment | Magnetizing Automation | Magnetic Measuring Instruments | Magnetizing Services Spring Returns, Unveiling a New Chapter — Setting Sail on a New Journey On the eighth day of the first lunar month of 2026, an auspicious day to commence work in the new year, JIUJU Automation was filled with warmth and vitality. Having set aside the leisurely pace of the Spring Festival, all employees gathered at the facility with full enthusiasm and high spirits, collectively embarking on the journey of hard work for the new year. They are committed to upholding their original aspirations through practical action and striving to write a new chapter of glory with dedicated effort. At 8:00 AM sharp...

Motor magnetizer: what core indicators should be most concerned about when the factory selection

March 5, 2026

Motor magnetizer: what core indicators should be most concerned about when the factory selection

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

February 27, 2026

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

An article to read: the principle of motor magnetization, the need and the underlying logic of permanent magnet motors

February 26, 2026

Automated Magnetic Charging Integrated Solution Magnetizing Equipment Magnetizing Automation Magnetic Measuring Instruments Magnetizing Service Magnetizing is the core step in the manufacture and maintenance of permanent magnet motors such as permanent magnet synchronous motors (PMS) and brushless DC motors (BDC). It relies on the principle of electromagnetic induction and magnetic field energy conversion, with the help of external strong magnetic field to make the internal magnetic domains of permanent magnets arranged in a directional manner, so as to form stable and long-lasting magnetism, which is the basic link to ensure the normal operation of the motor. First, the essence of magnetization: to give the motor...

Spring Ushers in a New Journey, Action Drives New Chapters｜JIUJU Automation Kicks Off 2026 with Success

February 25, 2026

Magnetizing Equipment | Magnetizing Automation | Magnetic Measuring Instruments | Magnetizing Services Spring Returns, Unveiling a New Chapter — Setting Sail on a New Journey On the eighth day of the first lunar month of 2026, an auspicious day to commence work in the new year, JIUJU Automation was filled with warmth and vitality. Having set aside the leisurely pace of the Spring Festival, all employees gathered at the facility with full enthusiasm and high spirits, collectively embarking on the journey of hard work for the new year. They are committed to upholding their original aspirations through practical action and striving to write a new chapter of glory with dedicated effort. At 8:00 AM sharp...

Motor magnetizer: what core indicators should be most concerned about when the factory selection

March 5, 2026

Motor magnetizer: what core indicators should be most concerned about when the factory selection

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

February 27, 2026

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

An article to read: the principle of motor magnetization, the need and the underlying logic of permanent magnet motors

February 26, 2026

Automated Magnetic Charging Integrated Solution Magnetizing Equipment Magnetizing Automation Magnetic Measuring Instruments Magnetizing Service Magnetizing is the core step in the manufacture and maintenance of permanent magnet motors such as permanent magnet synchronous motors (PMS) and brushless DC motors (BDC). It relies on the principle of electromagnetic induction and magnetic field energy conversion, with the help of external strong magnetic field to make the internal magnetic domains of permanent magnets arranged in a directional manner, so as to form stable and long-lasting magnetism, which is the basic link to ensure the normal operation of the motor. First, the essence of magnetization: to give the motor...

Spring Ushers in a New Journey, Action Drives New Chapters｜JIUJU Automation Kicks Off 2026 with Success

February 25, 2026

Magnetizing Equipment | Magnetizing Automation | Magnetic Measuring Instruments | Magnetizing Services Spring Returns, Unveiling a New Chapter — Setting Sail on a New Journey On the eighth day of the first lunar month of 2026, an auspicious day to commence work in the new year, JIUJU Automation was filled with warmth and vitality. Having set aside the leisurely pace of the Spring Festival, all employees gathered at the facility with full enthusiasm and high spirits, collectively embarking on the journey of hard work for the new year. They are committed to upholding their original aspirations through practical action and striving to write a new chapter of glory with dedicated effort. At 8:00 AM sharp...

Motor magnetizer: what core indicators should be most concerned about when the factory selection

March 5, 2026

Motor magnetizer: what core indicators should be most concerned about when the factory selection

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

February 27, 2026

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

An article to read: the principle of motor magnetization, the need and the underlying logic of permanent magnet motors

February 26, 2026

Automated Magnetic Charging Integrated Solution Magnetizing Equipment Magnetizing Automation Magnetic Measuring Instruments Magnetizing Service Magnetizing is the core step in the manufacture and maintenance of permanent magnet motors such as permanent magnet synchronous motors (PMS) and brushless DC motors (BDC). It relies on the principle of electromagnetic induction and magnetic field energy conversion, with the help of external strong magnetic field to make the internal magnetic domains of permanent magnets arranged in a directional manner, so as to form stable and long-lasting magnetism, which is the basic link to ensure the normal operation of the motor. First, the essence of magnetization: to give the motor...

Spring Ushers in a New Journey, Action Drives New Chapters｜JIUJU Automation Kicks Off 2026 with Success

February 25, 2026

Magnetizing Equipment | Magnetizing Automation | Magnetic Measuring Instruments | Magnetizing Services Spring Returns, Unveiling a New Chapter — Setting Sail on a New Journey On the eighth day of the first lunar month of 2026, an auspicious day to commence work in the new year, JIUJU Automation was filled with warmth and vitality. Having set aside the leisurely pace of the Spring Festival, all employees gathered at the facility with full enthusiasm and high spirits, collectively embarking on the journey of hard work for the new year. They are committed to upholding their original aspirations through practical action and striving to write a new chapter of glory with dedicated effort. At 8:00 AM sharp...

Motor magnetizer: what core indicators should be most concerned about when the factory selection

March 5, 2026

Motor magnetizer: what core indicators should be most concerned about when the factory selection

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

February 27, 2026

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

An article to read: the principle of motor magnetization, the need and the underlying logic of permanent magnet motors

February 26, 2026

Automated Magnetic Charging Integrated Solution Magnetizing Equipment Magnetizing Automation Magnetic Measuring Instruments Magnetizing Service Magnetizing is the core step in the manufacture and maintenance of permanent magnet motors such as permanent magnet synchronous motors (PMS) and brushless DC motors (BDC). It relies on the principle of electromagnetic induction and magnetic field energy conversion, with the help of external strong magnetic field to make the internal magnetic domains of permanent magnets arranged in a directional manner, so as to form stable and long-lasting magnetism, which is the basic link to ensure the normal operation of the motor. First, the essence of magnetization: to give the motor...

Spring Ushers in a New Journey, Action Drives New Chapters｜JIUJU Automation Kicks Off 2026 with Success

February 25, 2026

Magnetizing Equipment | Magnetizing Automation | Magnetic Measuring Instruments | Magnetizing Services Spring Returns, Unveiling a New Chapter — Setting Sail on a New Journey On the eighth day of the first lunar month of 2026, an auspicious day to commence work in the new year, JIUJU Automation was filled with warmth and vitality. Having set aside the leisurely pace of the Spring Festival, all employees gathered at the facility with full enthusiasm and high spirits, collectively embarking on the journey of hard work for the new year. They are committed to upholding their original aspirations through practical action and striving to write a new chapter of glory with dedicated effort. At 8:00 AM sharp...