Magnetizing Equipment

Magnetization Automation

Magnet Measuring Instruments

Magnetization Services

Industry background and challenges

Under the current background of rapid development of intelligent manufacturing and new energy industry, motor manufacturing enterprises are facing unprecedented opportunities and challenges. According to authoritative market data, in 2024, China'sAutomatic magnetizationThe market size has reached RMB 3.86 billion and is expected to exceed RMB 4.5 billion by 2025, with a CAGR of around 14.3%. Among them, the proportion of new energy vehicles has reached 32.5%, becoming the largest application market.

However, the traditional motor manufacturing process ofmagnetization sessionThere are still many pain points:

Inefficient production

Conventional single-station or double-station magnetizing equipment adopts the step-by-step operation mode of "loading → magnetizing → discharging → transferring → detecting", and at the end of each step, it is necessary to wait for the equipment to reset in order to start the next process, and a lot of time is wasted in the waiting process.

Unstable product quality

Manual operation and step-by-step inspection easily lead to product quality fluctuation and high defective product rate, which seriously affects the production efficiency.

Complexity of changeover adjustments

When replacing workpieces with different motor specifications, it is necessary to re-tune the magnetization parameters and replace the positioning tooling, which is time-consuming and affects the continuity of production.

High labor costs

Traditional equipment requires professional operators to monitor and adjust, and labor costs account for a relatively large proportion.

Solution: Four-station motor magnetizer

In response to the above industry pain points, we have launched a revolutionary four-station motor magnetizer solution. This equipment adopts advanced multi-station synchronization technology, and by reconfiguring the operation logic, it deeply integrates the magnetization and inspection links, which fundamentally solves the efficiency bottleneck problem of traditional equipment.

Core Technology Advantage

Multi-station parallel synergy technology

four-stationMagnetizerThe core innovation lies in the fact that the four workstations form a "parallel and synergistic" chain of operations rather than a single module that operates independently. Each station corresponds to a fixed process node:

• Workstation 1: Responsible for loading and accurate positioning of workpieces.
• Workstation 2: Focused magnetizing operation to ensure uniform magnetic field strength
• Stations III: Simultaneous magnetic performance testing for real-time quality monitoring
• Stations IV: Completion of qualified workpiece discharging and realization of automated flow

When Workstation 2 starts the magnetization operation, Workstation 1 has already completed the positioning of the next workpiece, and Workstation 3 is synchronized with the detection of the previous magnetized workpiece. The four links are seamlessly connected, completely eliminating the waiting time in the traditional process.

Intelligent Inspection and Quality Control

In terms of simplifying the inspection process, this technology breaks the traditional mode of "separation of magnetization and inspection". The four-station magnetizer directly integrates the detection module into station three, so that the workpieces can enter the detection process after magnetization without transferring, following the flow of stations.

Detecting unqualified workpieces, it will mark in real time and suspend the subsequent operation of the corresponding workstation, which is convenient for operators to troubleshoot the problem in time. This design avoids the flow of unqualified workpieces into the next loop and reduces unnecessary rework costs.

Quick changeover and flexible production

Multi-station synchronization technology also significantly simplifies the specification switching process. When replacing a motor workpiece with a different specification, the traditional magnetizer needs to re-tune the magnetization parameters and replace the positioning tooling, which is time-consuming; while the four-station magnetizer only needs to replace the adapted station positioning components for different specification workpieces, and the core magnetization and detection parameters can be quickly called up through the equipment's preset program without repeated adjustments.

Centralized control and intelligent management

The centralized control system of the equipment can manage the operation status of the four stations in a unified way, so that the operator does not need to monitor the magnetization and inspection equipment separately, but only needs to check the progress and inspection results of each station through the console, which greatly reduces the complexity of the operation.

System Support:

• Real-time data monitoring and display
• Historical data traceability and analysis
• Fault self-diagnosis and alarm
• Remote O&M and Parameter Optimization

Technical principles and working mechanisms

The four-station motor magnetizer is based on JiuJi's capacitive magnetizing technology, combined with modern control theory and industrial automation technology to realize efficient and accurate magnetizing operation.

Principle of Magnetization Technology

The equipment adopts high-voltage capacitor energy storage technology to release a strong pulse current in a short period of time to magnetize magnetic materials. The working voltage is generally concentrated in the range of 1.5kV to 4kV, with a typical value of 3kV, and the energy storage capacity ranges from 500 Joules to 64,000 Joules, which can satisfy the magnetization requirements of different specifications of motor magnets.

Multi-station synergy mechanism

Precise synergy of the four stations is achieved by means of a sophisticated servo control system and synchronized triggering technology:

1. Synchronous trigger controlMulti-channel synchronized triggering technology, supporting up to 16 channels of independent control, with inter-channel synchronization error of less than 50 nanoseconds.
2. Precision positioning systemRepeatability: Repeatability better than ±0.05mm ensures the accuracy of the magnetization position.
3. Real-time feedback adjustmentEquipped with high-precision sensors, real-time monitoring of magnetic field strength and waveforms during the magnetization process.

Application Scenarios and Industry Value

Four-station motor magnetizer is widely used in the following fields:

New Energy Vehicle Drive Motor Manufacturing

With the rapid development of the new energy vehicle industry, the demand for high performance permanent magnet motors is surging. Each new energy vehicle drive motor requires an average of four to six magnetizing processes, and the four-station magnetizer can significantly improve production efficiency and ensure the consistency and stability of motor performance.

Consumer electronics motor production

The demand for miniature precision motors for consumer electronics products such as smartphones, tablet PCs and wearable devices continues to grow. The four-station magnetizer can meet the demand for flexible production of small batch and multiple varieties, and support quick changeover and quality control.

Industrial motors and servo systems

The demand for high-precision servo motors in industrial automation equipment, robotics, CNC machine tools and other fields is increasing. The high-precision control and stable performance of four-station magnetizers ensure the excellent performance of servo motors.

Manufacture of electric motors for home appliances

There is a growing demand for energy efficient motors for household appliances such as refrigerators, air conditioners and washing machines. Four-station magnetizer can improve production efficiency, reduce manufacturing costs and meet the demand for mass production.

Customer value and return on investment

Significantly improve productivity

With multiple stations working in parallel, the 4-station magnetizer is able to increase productivity by more than 300%, dramatically shortening the production cycle and increasing capacity utilization.

Ensure consistent product quality

The integrated inspection system and intelligent quality control ensure consistent product quality and reduce the defective rate by more than 50%.

Reduced labor costs

Automated operations and centralized control reduce reliance on operators and reduce labor costs by more than 60%.

Fast return on investment

Based on real-world applications, the payback period for a 4-station magnetizer is usually within 6-12 months, creating significant economic benefits for the company.

Technical specifications and performance parameters

concluding remarks

In the rapid development of intelligent manufacturing and new energy industry, theFour-station motor magnetizerAs the key process equipment, it is leading the motor manufacturing industry to develop in the direction of high efficiency, intelligence and flexibility.

We believe that through continuous technological innovation and high quality service, the four-station motor magnetizer will bring significant economic benefits and competitive advantages to more manufacturing enterprises, and help China's manufacturing industry achieve high-quality development.

If you are interested in our 4-station motor magnetizer solution, welcome to contact our team of technical experts, we will provide you with professional technical consultation and customized solutions.

Magnetization of Magnetic Materials

3C Electronic Magnetization

Motor Rotor Magnetization

Car Speaker Magnetization

New Energy Vehicle Industry

Medical Equipment Industry

JiuJu Magnetization Case: Record of the whole process of magnetizing silicone magnetic products

February 25, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service In the industrial manufacturing field, silicone magnetic products are widely used in smart wear and sealing components because of their flexibility and magnetic properties. The core of their magnetic properties depends on professional magnetization process. This time, JiuJu magnetization undertakes the project of magnetizing silicone products, and successfully realizes the product's magnetic force from 0.01 gauss to 15.5 gauss by leaps and bounds, the following is the whole process detail...

JiuJu Magnetic Stripe Magnetization Video Case: Medical Magnetic Stripe Magnetization

January 7, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Services Magnetic stripes are widely used in medical cards, medical insurance cards and other medical credentials to store key data such as basic patient information and medical insurance participation information. Due to the frequency of use and the external environment, the magnetic stripe may become magnetically weakened or demagnetized, resulting in the inability of the equipment to read the information, and then need to be magnetized. The core principle of magnetization is to make the magnetic strip inside the...

JiuJu Magnetizing Video Case: Rubber Silicone and NdFeB Magnetizing

January 6, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service This paper focuses on the core process of magnetization of Rubber Silicone and NdFeB, the initial state of non-magnetic before magnetization, and the magnetic performance after magnetization. Through the gaussmeter measurement verification, it is clear that the highest magnetic unit after magnetization is up to 45.9 units and the highest magnetic unit after magnetization is up to 45.9 units (measured by gaussmeter). The magnetization process is the core link to realize the magnetic transformation of the two...

Precision Magnetization for Ferrite Cubes

November 13, 2025

Specializing in ferrite cube micro-magnetization, we deliver customized, precise solutions tailored to ferrite cube material properties. By fine-tuning parameters, we ensure the magnetization meets exact standards, fulfilling high-precision magnetic requirements and adapting to applications with strict demands for magnetization accuracy.

Motor magnetizer: what core indicators should be most concerned about when the factory selection

March 5, 2026

Motor magnetizer: what core indicators should be most concerned about when the factory selection

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

February 27, 2026

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

An article to read: the principle of motor magnetization, the need and the underlying logic of permanent magnet motors

February 26, 2026

Automated Magnetic Charging Integrated Solution Magnetizing Equipment Magnetizing Automation Magnetic Measuring Instruments Magnetizing Service Magnetizing is the core step in the manufacture and maintenance of permanent magnet motors such as permanent magnet synchronous motors (PMS) and brushless DC motors (BDC). It relies on the principle of electromagnetic induction and magnetic field energy conversion, with the help of external strong magnetic field to make the internal magnetic domains of permanent magnets arranged in a directional manner, so as to form stable and long-lasting magnetism, which is the basic link to ensure the normal operation of the motor. First, the essence of magnetization: to give the motor...

Spring Ushers in a New Journey, Action Drives New Chapters｜JIUJU Automation Kicks Off 2026 with Success

February 25, 2026

Magnetizing Equipment | Magnetizing Automation | Magnetic Measuring Instruments | Magnetizing Services Spring Returns, Unveiling a New Chapter — Setting Sail on a New Journey On the eighth day of the first lunar month of 2026, an auspicious day to commence work in the new year, JIUJU Automation was filled with warmth and vitality. Having set aside the leisurely pace of the Spring Festival, all employees gathered at the facility with full enthusiasm and high spirits, collectively embarking on the journey of hard work for the new year. They are committed to upholding their original aspirations through practical action and striving to write a new chapter of glory with dedicated effort. At 8:00 AM sharp...

Motor magnetizer: what core indicators should be most concerned about when the factory selection

March 5, 2026

Motor magnetizer: what core indicators should be most concerned about when the factory selection

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

February 27, 2026

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

An article to read: the principle of motor magnetization, the need and the underlying logic of permanent magnet motors

February 26, 2026

Automated Magnetic Charging Integrated Solution Magnetizing Equipment Magnetizing Automation Magnetic Measuring Instruments Magnetizing Service Magnetizing is the core step in the manufacture and maintenance of permanent magnet motors such as permanent magnet synchronous motors (PMS) and brushless DC motors (BDC). It relies on the principle of electromagnetic induction and magnetic field energy conversion, with the help of external strong magnetic field to make the internal magnetic domains of permanent magnets arranged in a directional manner, so as to form stable and long-lasting magnetism, which is the basic link to ensure the normal operation of the motor. First, the essence of magnetization: to give the motor...

Spring Ushers in a New Journey, Action Drives New Chapters｜JIUJU Automation Kicks Off 2026 with Success

February 25, 2026

Magnetizing Equipment | Magnetizing Automation | Magnetic Measuring Instruments | Magnetizing Services Spring Returns, Unveiling a New Chapter — Setting Sail on a New Journey On the eighth day of the first lunar month of 2026, an auspicious day to commence work in the new year, JIUJU Automation was filled with warmth and vitality. Having set aside the leisurely pace of the Spring Festival, all employees gathered at the facility with full enthusiasm and high spirits, collectively embarking on the journey of hard work for the new year. They are committed to upholding their original aspirations through practical action and striving to write a new chapter of glory with dedicated effort. At 8:00 AM sharp...

Motor magnetizer: what core indicators should be most concerned about when the factory selection

March 5, 2026

Motor magnetizer: what core indicators should be most concerned about when the factory selection

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

February 27, 2026

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

An article to read: the principle of motor magnetization, the need and the underlying logic of permanent magnet motors

February 26, 2026

Automated Magnetic Charging Integrated Solution Magnetizing Equipment Magnetizing Automation Magnetic Measuring Instruments Magnetizing Service Magnetizing is the core step in the manufacture and maintenance of permanent magnet motors such as permanent magnet synchronous motors (PMS) and brushless DC motors (BDC). It relies on the principle of electromagnetic induction and magnetic field energy conversion, with the help of external strong magnetic field to make the internal magnetic domains of permanent magnets arranged in a directional manner, so as to form stable and long-lasting magnetism, which is the basic link to ensure the normal operation of the motor. First, the essence of magnetization: to give the motor...

Spring Ushers in a New Journey, Action Drives New Chapters｜JIUJU Automation Kicks Off 2026 with Success

February 25, 2026

Magnetizing Equipment | Magnetizing Automation | Magnetic Measuring Instruments | Magnetizing Services Spring Returns, Unveiling a New Chapter — Setting Sail on a New Journey On the eighth day of the first lunar month of 2026, an auspicious day to commence work in the new year, JIUJU Automation was filled with warmth and vitality. Having set aside the leisurely pace of the Spring Festival, all employees gathered at the facility with full enthusiasm and high spirits, collectively embarking on the journey of hard work for the new year. They are committed to upholding their original aspirations through practical action and striving to write a new chapter of glory with dedicated effort. At 8:00 AM sharp...

Motor magnetizer: what core indicators should be most concerned about when the factory selection

March 5, 2026

Motor magnetizer: what core indicators should be most concerned about when the factory selection

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

February 27, 2026

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

An article to read: the principle of motor magnetization, the need and the underlying logic of permanent magnet motors

February 26, 2026

Automated Magnetic Charging Integrated Solution Magnetizing Equipment Magnetizing Automation Magnetic Measuring Instruments Magnetizing Service Magnetizing is the core step in the manufacture and maintenance of permanent magnet motors such as permanent magnet synchronous motors (PMS) and brushless DC motors (BDC). It relies on the principle of electromagnetic induction and magnetic field energy conversion, with the help of external strong magnetic field to make the internal magnetic domains of permanent magnets arranged in a directional manner, so as to form stable and long-lasting magnetism, which is the basic link to ensure the normal operation of the motor. First, the essence of magnetization: to give the motor...

Spring Ushers in a New Journey, Action Drives New Chapters｜JIUJU Automation Kicks Off 2026 with Success

February 25, 2026

Magnetizing Equipment | Magnetizing Automation | Magnetic Measuring Instruments | Magnetizing Services Spring Returns, Unveiling a New Chapter — Setting Sail on a New Journey On the eighth day of the first lunar month of 2026, an auspicious day to commence work in the new year, JIUJU Automation was filled with warmth and vitality. Having set aside the leisurely pace of the Spring Festival, all employees gathered at the facility with full enthusiasm and high spirits, collectively embarking on the journey of hard work for the new year. They are committed to upholding their original aspirations through practical action and striving to write a new chapter of glory with dedicated effort. At 8:00 AM sharp...

Motor magnetizer: what core indicators should be most concerned about when the factory selection

March 5, 2026

Motor magnetizer: what core indicators should be most concerned about when the factory selection

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

February 27, 2026

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

An article to read: the principle of motor magnetization, the need and the underlying logic of permanent magnet motors

February 26, 2026

Automated Magnetic Charging Integrated Solution Magnetizing Equipment Magnetizing Automation Magnetic Measuring Instruments Magnetizing Service Magnetizing is the core step in the manufacture and maintenance of permanent magnet motors such as permanent magnet synchronous motors (PMS) and brushless DC motors (BDC). It relies on the principle of electromagnetic induction and magnetic field energy conversion, with the help of external strong magnetic field to make the internal magnetic domains of permanent magnets arranged in a directional manner, so as to form stable and long-lasting magnetism, which is the basic link to ensure the normal operation of the motor. First, the essence of magnetization: to give the motor...

Spring Ushers in a New Journey, Action Drives New Chapters｜JIUJU Automation Kicks Off 2026 with Success

February 25, 2026

Magnetizing Equipment | Magnetizing Automation | Magnetic Measuring Instruments | Magnetizing Services Spring Returns, Unveiling a New Chapter — Setting Sail on a New Journey On the eighth day of the first lunar month of 2026, an auspicious day to commence work in the new year, JIUJU Automation was filled with warmth and vitality. Having set aside the leisurely pace of the Spring Festival, all employees gathered at the facility with full enthusiasm and high spirits, collectively embarking on the journey of hard work for the new year. They are committed to upholding their original aspirations through practical action and striving to write a new chapter of glory with dedicated effort. At 8:00 AM sharp...